http://i28.photobucket.com/albums/c2...er/chassis.jpg (There are 2 more bolts on the other side. Is that all that's holding the chassis down?)
Probably.
http://i28.photobucket.com/albums/c2...tier/clock.jpg ("Television Movement")
http://i28.photobucket.com/albums/c2.../brokepots.jpg (Will I have to replace these pots as well?)
Those aren't broken, they are recessed because they are not usually adjusted by the consumer.
http://i28.photobucket.com/albums/c2.../pencilbox.jpg (Open pencilbox)
http://i28.photobucket.com/albums/c2...r/oddsends.jpg (WTF are all those springs?)
Don't know, maybe ground springs for the CRT or else they hold some of the wires up?
http://i28.photobucket.com/albums/c2...thistoowtf.jpg (Do I have to remove this TOO?)
Not if the wires unplug from the chassis.
http://i28.photobucket.com/albums/c2...thisgetter.jpg (is this getter? the tube lights up though!)
That is the Ion trap, make a note of how it's positioned, (this picture will do nicely) it has to be adjusted correctly or nothing will appear on the screen.
http://i28.photobucket.com/albums/c2.../yokewires.jpg (these are the ones that ctrl the yoke, right? how do I disconnect the slender white one?)
Are you talking about the white one going to the side of the tube?
Use care here, that's the high voltage lead, the tube can store a charge too and shock you, not fatal but enough to make you recoil and injure yourself or break something. Discharge it to the black coating on the CRT before touching it, do it several times to make sure, then just push it sideways and unhook the clips from the hole in the tube. Do not force it!