[Charlie]

Polar,

I think I could use a part from your set. I stumbled across something here on accident while trying to fix audio problems.

I found the horizontal osc. coil on the deflection board is missing. Seems someone yanked it from this chassis to fix another. You'll see the coil near the 6BL8. Note in my photo where the empty spot is in the center of the photo.

I changed the transistor in the IF strip, and now the volatges in that area are where they should be. That's one problem fixed.

Right now, I'm trying to figure out why i'm not getting any output to the speaker. All of the voltages at the 6AQ5 are where they should be. The output transformer is good, tube is good, and the speaker is good. I'm not even getting any static or popping from the speaker while connecting or disconnecting the speaker leads. Usually, there will be all kinds of loud popping while touching the lead on the connection, but I am getting nothing. It seems this would be simple to figure out, but I am stumped. Suggestions anyone?

Output diagram below...