|
Flyback Troubles
Went out to toy around with this CTC15 chassis some more. Last time I ran it, the flyback was running hot after 30 to 45 minutes of operation.
I checked the current off the 6JE6 HO tube. It was running about 220ma. The schematic says not to let it run over 210. I adjusted it down to 205ma, but the flyback is still getting hot enough to where the wax bubbles in the middle.
Everything else seems to be running just fine. Any suggestions?
__________________
Charlie Trahan
He who dies with the most toys still dies.
|