|
What is it with the vertical circuits of these old CTC chassis, it seems that every one of them have some problem, I looked in the vertical board for some resistors that may be out of tolerance, only 2 of them are reading 10% over, now usually when they read over I juist replace them. If they read under, usually it'sbecause they are in circuit and something is drawing down the resistince. All the caps seem to be ok on an esr meter. What has happened is the Vertical height is lacking about an inch on the bottom, about 10 minutes of being on the height dramatically squishes down on the bottom, and stretches on the top but shrinks as well making my think it;s in the linearity circuit.. I did change the resistors that go from the lin and height pots to the chassis though to no avail.
__________________
Honey, turn on the tv.. I'm cold!
|