Quote:
Originally Posted by tubesrule
While this worked fine for oscilloscopes and such test equipment, gassy tubes are not very suitable for use in television. A gassy tube can only be focused over a narrow band of beam currents. Since the beam current needs to be modulated for television, this resulted in poor focus.
|
Hi Darryl, these early German gassy picture tubes were used up to 1936. From 1937 and later the CRTs were high vacuum tubes.
In a gassy tube the negative voltage at the metal cylinder was adjusted for a focussed beam with maximum brightness. When the beam current was lower or low, the focus became poor, and as a result, the point on the screen became darker. In this way, one effect of the gassy tube was an improvement of contrast, but a loss of gradation.
The high vacuum tubes generated a more natural b/w picture with an improvement in gray tones and gradation.
- Eckhard