|
I did an analysis on the chassis, and I believe its the powersupply that is not working.
like phil nelson said on his site, that he replaced the filters and selenium, and up pop the picture.
well, i powered mine on through a variac, the resistor "wires" on the ballast tube glow red for a second or two before the tubes start to warm up. There is alot of heat on the ballast tube. but, on the other mica, the resistors were cold.
So I think, that someone "just plugged it in" sometime in the past, and the shorted lytics blew out the seleniums. so there is NO volts on any tubes period. except for filiments.
|