I have given it three coats of remover, and am still not getting everything off. Here are some pictures of what part of the lower half I have been working on.
I have two main concerns right now. I am afraid that all the black paint and old finish will not come off the trim work, like at the bottom and near the top. Obviously the wood there is not all the same.
My other concern is that with some of the front vertical pieces, black has been absorbed into the wood itself. If you look at the far left vertical piece here, at the bottom, that black look is not finish left on the surface of the wood. I am at a loss as to how to get this out of the wood.
