|
I know ive kinda been running on and on and on with this thread, and it is probably misleading.
I am sorta treating it like my blog. But, go ahead and ignore everything above this point:
The set is in now working order, the sync is locked, the sound is preasent, and the picture is on the CRT.
The problem I cannot seem to be able to figure out is the focus is sorta bad, and the linerity is very very bad.
The tuner happened to be on CSPAN lastnight, and dick cheney had a very bad case of the coneheads.
Also, I checked the (2) 4.7megohm resistors between the two .005s at the vertical output plates, they check fine, but I replaced them anyway. The two 1megohm resistors off of the focus pot test within tolerance.
The 2.2meg series resistors on the focus pot test fine also.
I dunno what the deal is.
I checked the (4) 10megohm resistors around the vertical output section, they all test perfect.
I dunno what to do now. Its weird. Unless one of my HV .005s are already bad. I dunno. I can center the picture. but the linerity is horrible, and the focus is somewhat bad.
Help. I may need a new batch of .005s
|