|
uhhh.
I cant check the waveform if there is no HV
there is none. Heres why:
The vert output gets its B+ from the HV supply.
Any ideas?
id say the .005 are breaking down under HV.
I did switch them, the picture didnt change.
There is also a big huge aluminum can that is rated .005 at 6000vdc I havent changed yet, because I dont have a replacement for it yet.
according to the schematic, it looks like a bypass cap, it has to work or there wouldnt be any HV.
Last edited by mbates14; 07-08-2004 at 10:30 AM.
|