Quote:
Originally Posted by RetroHacker
Any chance the AGC adjustment got diddled with while you were moving it? Sounds like the AGC is getting overloaded with strong signals. Also, check all the tubes and make sure none have wiggled loose. Any time that you move one of these old sets, there is the potential for minor mishaps.
-Ian
|
I'll check that maybe later. Don't think it got messed with, it's an adjustment hidden on the back IIRC. Would it still get overloaded even with an off the air, normal station (with no antenna connected)? I don't live right next door the tower or anything; it's just a decent, solid signal you can pick up while in a garage. If you turn everything up to full blast you can sorta kinda see a wavy, distorted image flying by (almost like hsync is lost)