Quote:
Originally Posted by roundscreen
I use silicone rubber that you can find at radio shack. Discharge the crt just to be safe and clean the dust and dirt off the flyback before you apply it. Silicone rubber has a nasty smell when you first put it on but after it cures it will go away.
Ed
|
Good tip!
I've used rubber cement on one or two in the dim dark past, and have also used "corona dope" but the hazard with either is that it needs several days of curing time before the set can be operated. Otherwise the flyback
will burst into flames.
If the smell of the silicon rubber is offensive one might try the sealant made for repairing leaky fish tanks. Such can be had at a pet supply store in the aquarium department. It is far less malodorous.