[ke4cij]

Is the 750 the one that has XM radio? If it is, I have already read several bad reviews. Several have been defects right out of the boxes! Some going dead after only a few days of use. In my experiences with Chinese Machines and other devices. The Chinese are very able to build and design some very good products. The problem they have or at least in my experience is they will take something that has been designed to have heavier electronics and remove and replace with lighter duty. They really like to go cheap to the point they remove needed compontants! I mean to the point it is just funny! Several years ago, I worked in Textiles and had the chance to visit a couple of plants. They have little to no quality control and they really enjoy copying other peoples designs. The main machines we used at my company was Shima Seiki built in Japan and very high in quality. A Chinese Company copied several Shima designs but changed the electronics, and built the machines much lighter. The screws was so badly tapped they would strip out if you removed one. If you got lucky and was able to remove the screws you couldn't reuse them. Most of the parts was so badly fitted it took nearly a month to actually get one machine to run! When it did, it wouldn't knit correctly! The Electronics was so light just turning them on would cause major computer problems! The Company I worked for had us trail these machines for 3 months and the end result was Junk and we sent them packing! You could buy 6 of the Chinese machines for the cost of one Shima Seiki! Later down the road I heard that several companies bought these machines and all had serious troubles with them!

I think its just the mentality of these people if they can get buy with it they will produce junk and then pawn it off cheap! People think they are getting a good deal but they really aren't. Another factor to consider is the safety issues and what some of the materials they use! Some of the stuff they use is just down right dangerous to human life!