View Single Post
  #6  
Old 08-31-2004, 10:40 AM
Chad Hauris's Avatar
Chad Hauris Chad Hauris is offline
VideoKarma Member
 
Join Date: May 2003
Location: West Texas
Posts: 2,085
O.K., I guess the 12 was the one that was like the 15 but used an octal horiz. output tube (6DQ5?)

It seems to me like the revisions of this chassis are:

CTC-12: Octal H.O. tube, selenium focus rectifier, 3a3 and 6Bk4 mounted horizontally above flyback in cage.

CTC-15: Similar to CTC-12 except uses 6JE6 9-pin H.O. tube.

CTC-16: Uses the flyback where the 3A3 plugs into it. Uses a tube type focus rectifier.

CTC-17: Same as CTC-16 but uses rectangular crt, adding pincushion components and degausser.

CTC-25: Similar to CTC-17 but uses transistorized audio section.

CTC-28: Returns to tube type audio section.

CTC-35: All models equipped for remote control.

All of these seem to be essentially similar...there were also some other changes along the way, such as using a bridge rectifier rather than a voltage doubler and substituting solid state diodes for the 6JU8.
Reply With Quote