[mattdavala]

Hi everybody!

I've tried my beltron 8080 at cleaning a 14QP4 with great results. BUT


I had to try restoring a 21EP4 but the Beltron wasn't operating as per the instructions. On the restoring function, there was no current shown on the meter, and none of the restoring lights lit up. I only tried it once. The instructions said that the current meter should go up around 80 and then I should press the interrupt function.

The tube is improved, but it could have been from the cleaning function.

The lights were just replaced. Any ideas?

Thanks
Matt Davala