Quote:
Originally Posted by yagosaga
Meanwhile I have adjusted the SECAM decoder. I still have a fault in the flipflop which switch and change the delayed and the actual color channels. But the picture quality is much better than before.
|
The flipflop is OK. I checked it with the scope. But I found that the delayed SECAM channel had no signal. I retracked the color signal and found that the SECAM delay line was not working. I replaced it with a PAL delay line. Now, I get pretty colors with this set.
Note that the convergence here is the best what I can get. The transductor does not bring the full adequate currents for a proper convergence.
- Eckhard