Quote:
Originally Posted by Dave A
My factory Pilot magnifier has two clips/hooks on the upper corners that hang over the plastic grille strips and two standoffs on the bottom that position under the CRT somewhere. All are mounted from the back. It could be raised or lowered on any of the plastic strips for the best viewing angle. Needless to say, the weight of the thing was a stress on the plastic and cracked may of them. It also has a Pilot Radio decal on the top. No corner screws on the front.
Yours looks very close in size and shape, and could be a later model. The brackets were a good idea though to eliminate the grille problems.
And...shameless Beltron promo...you can clip leads to the CRT and test it.
|
My magnifier has no decal, but otherwise looks just like the one shown on tvhistory. The legs may be homemade. His papers include a pencil mechanical drawing with dimensions.
I have continuity on the 3KP4 CRT filament, but no Beltron to try it out further.
Using a 3KP1 for troubleshooting sounds like a good idea. Anybody have a spare you'd like to sell?
Phil Nelson