|
That new zenith is good looking. uh goldstar. I worked on goldstar tvs in the 80s. Fixed them under warranty. Also repaired alot of them when I had my store in the 90s.They were a good tv for the price. Most of the repairs were simple. The zenith goldstar problems were rauland. A63ADGP22 and the 27 inch crts . power supplys in the chassis could not take current draw when the crt would short. I see alot of rauland tubes in video game monitors. Replaced alot of them.
Here are some pictures of more wood. This is the philco I got fromTim.
This is one cool set. solid state tuner and If. Also a tuining eye. {needs tube}.6KD6 horz out tube. No hv regulator tube. I ran it about 10 min and flyback transformer started tor get warm. oh oh. This set has a horz bias control.{ Bias the horz output and it will control the hv}. The control was up all the way. I turned down the horz bias and silicone the fly. Now it takes a hr before it gets warm. The red gun was weak so i hit it with my b-k on low setting. Also replaced caps in the vert out, Resolder bds, Cleaned the controls and tuner.I think it Works good for an old bag.
|