|
i just aquiried a philco like the ones previously stated . I did not obtain a schematic yet, will be doing that in the next few days . I replaced the tubes which tested bad , then replaced the bumble bee caps, wax caps and electrolytics as well . The two selenium rectifiers tested good , so for now i will leave them in and eventually changed them . Anyhow after powering it up on the variac , i had great sound, high voltage but only a vertical line on the screen . I sprayed the two vertical pots with cleaner/lube and checked them with a meter but still only get a line which opens up to a inch with controls all the way out . Any one have a idea of where i should check next ???
|