[Adam]

I did the convergence tonight.

I did pull the cone back on that speaker to try to get in there and solder on a new wire, but there was only maybe a 1/16 in. of wire left to solder onto inside that speaker, and there was no way to solder a new wire to it without touching a paper portion of the speaker with the iron. I did fix it at first, but I didn't solder it well enough for the wires to stay attached, when I tried a second time I burned part of the speaker, no way to repair it now, I'm going to have to look out for another one.

Here's a pic of where the lamp holder goes under the cabinet, I don't have the original holder. The reason why nothing will fit is that there needs to be only 1" space between where the front tip of the bulb would be inside the hole and where the bracket would come off the holder to attach to the cabinet (see the small screw hole just to the right). But I'm sure I can eventually adapt something, if nothing will fit as is.