View Single Post
  #1  
Old 02-04-2009, 10:59 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
A Philco I couldn't resist

I probably shouldn't have, but since it was only about 23 miles away I couldn't resist. The cabinet is in really good shape and the chassis is fairly clean.

The listing said a piece of laminate had come off. There was an old envelope taped to the front of the set. It was sealed and dated 1980. I pulled it off and found that the laminate was inside. It appears that it was placed in the envelope about 29 years ago.

That will make repair very simple. The only problem is that there is scotch tape stuck to the finished surface of the veneer. I need to find a way to remove it without disturbing the finish.

The set is a Philco 50T-1432.

John
Attached Images
File Type: jpg Philco_Front.jpg (73.1 KB, 4 views)
File Type: jpg Philco_Controls.jpg (69.0 KB, 1 views)
File Type: jpg Philco_Top.jpg (62.8 KB, 1 views)
File Type: jpg Philco_Chassis.jpg (66.8 KB, 4 views)

Last edited by jeyurkon; 11-14-2009 at 08:28 PM.
Reply With Quote