[Tony V]

I picked up the Truetone today and got it home. A quick check looks like everything overall is in good shape. The model number is 2DC1667D and of course it was made for Western Auto. I couldnt find any chassis numbers stamped on it. It had notes inside where it was re-tubed in '86 and it also has a replacement GE crt that tests almost new.

It does have the beginnings of cataracts starting on the outer 1/4 of an inch so its more likely to be a RCA tube than Zenith. It is a RCA clone but possibly may be earlier as its more similar to a CTC12 than a CTC16 as it has the CTC12 style flyback set up instead of the CTC16 version. It has factory UHF so its at least a '63 model. It doesnt have a nuvistor installed and it has an automatic deguasser. One thing i've never seen on a color roundie is that it has a push pull instant on switch installed on the rear of the chassis with tone control integral with it. One of the filter lytics must have went bad at some point as theres and extra one strapped to the outside of one of the originals. That will be corrected when i do the recap.

I did a slow power up with variac and it produced a raster but with a hum bar of course. No video but its picking up the channels as the audio section works fine. Once the recap is done then i can trace this down. So, its got a good flyback, power transformer, crt and new tubes so needless to say it was worth chasing down. Another thing i've never seen before is it has white drop caps instead of orange or brown drops. I hope this isnt a bad thing.

I'll finish checking it out this evening and post pictures for you guys sometime tommorrow. I think another member on here has one like it as it has the VHF/UHF controls with 4 knobs directly underneath them forming a square.
-Tony