Quote:
|
Originally Posted by roundscreen
Replacement of the caps c611-c610 and a horz realignment may help bring up the grid voltage at the 6CB5. Also give the cap off pin 7 of the 6cg7 a check. 270 mmf{pf} I can not read the # of that cap. Sorry about the goofy posts.{kid running around}
ED.
|
No goofy posts but elementary help! Thank you for your support. These caps are the usual suspects... They were already recapped with small brown dotted ceramic caps. But I think the voltage rate seems not high enough, there are high currents in this oscillator unit. And I will change them with higher rated polypropylen caps. I'm just on the way in the city and will got to the next electronic store.