Quote:
Originally Posted by Ralph S
The 1956 T6 Service Data is remarkably cryptic, basically saying to measure the current across fuse F104 (with fuse removed, I assume) and set it to something less than 220 ma while watching the HV with a high voltage probe to show a reading somewhere between 18 and 22 KV.
|
Set the current to 180 ma and the LOPT remains cool. With 220 ma, the LOPT will running hot.
Operate the set for one hour and touch the LOPT or measure the temperature. Is it hot? The temperature should not exceed 40°C.
- Eckhard