|
Old tv's sure are fun. Part of the problem is that you adjusted the pots on the convergence board early on. No biggie though. The static convergence magnets will move the dots diaganally for red and green. Blue will move up and down. Once height and lin are right, you may have to redo the center convergance several times. I usually concentrated on red and green first. If you can, put the convergence pots on the convergence board back, or close to where they were originally if any are near the end of their travel. Because red and green do not move straight up or left and right, they will be toughest to get right. Once you do though blue should be easier to get lined up. You will probably want to replace that centering pot. Be patient, and when you get frustrated stop for a while, and take a break. It will have a great picture again.
Bill R
|