I've decided to give re-stuffing the can electrolytics a try on this set using
zenithfan1's technique.
I practiced on a few old caps and I
think I've got the hang of it
There are 3 in total. Two mounted to the chassis and one clip on. Here's a shot of one just prior to removal. I made notes of the original position and which leads went where.
I've got a question for y'all. Should there be a metal plate or two around the RF amp? Seems that the side panel and possibly something on the underside is missing.
Maybe I'll just have to pull the chassis on my 20X12 to compare.