|
Some of it looks the same, like the horizontal and vertical circuits. The schematic shows a doubler in the HV section though, where I have only a 1B3 and a damper. I should be able to use it to figure out what's going on with the horizontal not locking, which is probably gonna end up being something with either the 12AX7 sync seperator, or the 12AU7 right after it. I know AGC is working fine, because if I inject a signal into the tuner I can cut off the 'picture' on the screen by adjusting the AGC pot. It goes blank past a certain point.
I'll have a look at the horizontal circuitry in detail as well on the off chance something's still amiss there, but it seems to be working fine. Well see.
|