Quote:
Originally Posted by rollei35guy
I don't think so. It may be that one side of the secondary is tied to the transformer mounting. Do you have a scope you can put on the output?
I would first verify the power supply. Check for B+ and filament voltages. And then work forward to the output stages. You still have that hot capacitor that maybe an issue.
|
The B+ was 125. the filament voltage on the "hot" cap was 82 volts. well, It is in the filament line and is a 25 volt cap.That also explains why I noticed that I lost a tube in the output.No on the scope for right now, I can borrow one eventually