|
disconnect both of the green lead for the one side (not the convergence socket side) now the B+ load is about 8k with cold filaments (resistance reading at the output of the bridge rectifier). Was 24 ohms (yikes) with the transformer in circuit.
Gonna need some help locating a replacement, figured I would ask here, and give moyers a call. I need a part number.
Its a CTC16XL, not sure what it is but its the xforer behind the HV cage. has
grn/yellow (disconnect to find short to ground)
grn (disconnect to find short to ground)
blue
red
yellow
then on the other side
Orange
blk/wht
red/blk
red/wht
red/green
green (this is connected to the chassis, I suspect it is a internal primary to secondary short causing the problem)
Last edited by DaveWM; 10-19-2009 at 07:05 AM.
|