Quote:
Originally Posted by Phil Nelson
...
1. I can't reduce the width using the horizontal size adjuster. It seems to do nothing, in fact. (Horizontal hold and position do work.) If it overscans this much on the bench, I'll lose even more (1/2 inch on both sides) when it's in the cabinet behind the mask. I haven't fiddled with linearity because it looked correct when I put on a crosshatch pattern.
|
Phil,
To reduce the width a little, one thing you might try is to drop the screen (G2) voltage on the HO tube slightly. The caveat is that the HV will drop a bit too. I dunno if this would be acceptable or not. Bill(oc)