|
roundy crt base
I just changed one of these out the other day. I had a junk 21fjp22, I used a big weller soldering gun and a good manual solder sucker. I just heated each pin up and hit it with the desoldering tool, this removed all of the old solder in the pin. The base came off pretty easy as it was already slighty loose. I did the same thing with a good 21fjp22 with a broken base. I then soldered small gauge bus wire to the wires on the good tube and fed these through the pins on the good connector. I then used electronic grade rtv to glue the base to the good tube and soldered the wires in the pins. Should work on your tube, just take your time and be patient, you have nothing to lose by tying it! Good luck.
Mike
|