|
I just looked at the CTC-7 schematics and noticed the same thing and came to report back. Must have been a field modification to enhance contrast on the 5. I just looked on PW-400 and C410 is missing, a 22pf from pin 7 to 1 on the 12BY7. This cap should have been there per the original schmatic. There isn't even a place for that capacitor on the board in my set. This cap is not used on the CTC-7, so can I assume this wiring job was a modification at the factory?
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
|