Quote:
Originally Posted by Reece
Very nice pictures! Amazingly sharp. I noticed that set used a 6X5 in the power supply section. Those have been known to short and take out a power transformer. Here is a whole discussion about the early vs. the later version of the tube, the later "X" plate design usually deemed more rugged. One good idea is noted: provide a separate 6.3 volt transformer for the 6X5 heater, so that if it does short, it won't take out the power transformer. Some just replace the tube with a couple of diodes.
http://antiqueradios.com/forums/view...&highlight=6x5 |
Thanks for the reminder. You guys warned me about that tube when I picked up my Halicrafters too.
I was flipping through the production changes and discovered that Admiral added a fuse on the power supply on later runs.
They also suggest that when servicing this set to retrofit a fuse in if it's not already there.
I think I may go the diode route since it's easily reversable
