Quote:
Originally Posted by leadlike
The vertical and horizontal hold controls are in the rear of the set. The literature I have been reading on this set describes these controls as something that only need be set up once, and then left alone. We'll see how much that is true once the set it running. I will say that the vertical height, hold, and linearity interact with each other a good deal. If that vertical hold control was on the front of the set, in the hands of the average Joe, you could probably really mess up the picture.
|
On my 1-108 chassis Sylvania the horizontal and vertical controls are underneath the chassis. Accessible, but not easily. Once set, they are very stable. The horizontal circuit is an RCA design.
John