|
Snow is raster, no signal to modulate the crt beam.
you will need a 75-300 coax transformer to connect the cable to the vhf input on the tv.
select channel 3 or 4 and try adjusting the fine tuning which is prob part of the tuner, the outer ring. you may need to push in as you turn, however I am not familar with that model.
Now back to the TV a few questions, has it been gone over by someone that knows how to repair old tv's?
If not you should stop trying to use it until it has. You can do damage to the set, not to mention the possibe fire hazard. These old set can be repaired and work well, but there are parts in there that are 50 yrs old and long past the normal service life.
|