Quote:
Originally Posted by Steve D.
John,
I stand corrected on the Aldrich top being plywood under the photo finish. My Aldrich didn't have factory UHF, so I installed a UHF receiver inside the cabinet and drilled two holes in the side for the receiver knobs to protrude. I recall that at least the side panels were fiberboard or Masonite. This was many years ago. I don't drll holes in CTC-5's (or any vintage set) anymore. I do agree that you should leave the finish alone, although you probably could touch up the top a bit.
-Steve D.
|
And you were right about the sides. They are Masonite.
John