|
I have not seen the caps fail on those, but sometimes one or two resistors (and sometimes none, depending on whether the IC went went open or shorted). I have used STK394-160E on those, but they are getting scarce these days. I NEVER use the -110 on anything. Too light duty. These days I usually use STK392-150, as they are fairly tough and still available. Make sure they are GENUINE SANYO Ics. There are a lot of fakes out there, and they will usually fail in short order, and may take several of those resistors with them. A quick test, take a Q-TIP with a dab of acetone on it and see if the number rubs off of the part. If the number wipes right off, it's fake.
|