|
Oops, forgot to mention that an easy fix to that tuner is to gently pry up on the channel strip contacts. If you notice they are shaped like a sideways question mark with one side open..(for prying up on!). You'll see some are laid down more than others so the trick is to get them about the same height as the highest. That way you're not prying up too much! Just use a real small blade screwdriver inserted as square as possible to avoid contact with the coil windings.
You can also easily remove the whole turret assembly if you'd like, but shouldn't need to.
What I did to clean those and not make a spray mess was to saturate a Q-Tip and clean/wipe those contacts. You can then take another Q-Tip or your finger and apply a little Vasolene to those contacts. As long as your tubes are ok I bet your tuner problems will "clear up!" (Sorry, couldn't resist!!)
|