|
not silly at all looking at the voltage readings and the schematic it seems that should be where the problem is, I did not have suitable replacement so I made one with two in parallel, but the readings were the same. I am going to get a couple of replacement parts including that one for the horizontal circuit tomorrow, currently all minus two or three resistors are new, all the electrolytic and paper caps replaced about 3 years ago. I do need to get a new horizontal center control (it works but has a short, oops, in it so i can not adjust) as well.
Last edited by Patnukem; 05-19-2010 at 01:26 AM.
|