Quote:
Originally Posted by andy
Considering how it ages, I'm not sure why anyone would want to add new PVA. I just use some foam mounting tape in the corners as spacers (usually 2 layers thick), then seal the edge with silicone. After it's dry, I go around the edge with packing tape for a little extra strength. The safety glass will still do its job without the PVA, there will just be slightly more glare with an air gap.
|
+1, Also, trying to replace that PVA would most likely end up having air bubbles trapped in it. Sealing it back on the way andy says works beautiful.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
|