Quote:
Originally Posted by ha1156w
I'm still learning "proper" cabinet refinishing of my old radios and TVs. I see you're using Shellac as well as the Laquer. At what point do you use each? Shellac base and lacquer topcoat with toners in the middle?
|
Sort answer -yes.
I used shellac as a grain filler. Mahogany and walnut are quite porous and you really need to do this step if you want a smooth surface. You could use lacquer for this as well but shellac dries faster. It also is a good wood sealer before staining.
I went with stain for the body, but I could just as well have used toner. I did use toner for the trim. After that, I used about 10 coats of Deft Semi-gloss sanding every 3 coats or so with 400 grit.
Here's some more info:
http://woodworking.about.com/od/fini...OutLacquer.htm