|
C301 was installed with reverse polarity according to the schematic-but this didn't sit too well with me. I have looked at a number of chassis pictures from this and similar sets, and they all appear to be installed in this manner. No matter, it didn't change the issue anyway.
This is a later run chassis from what I can tell, and the 4uf has been stepped up to 50mf. I'll confirm the rest to be sure.
I would normally associate this sort of thing with a fowled up AGC adjustment, but I don't think this set has an AGC pot. I'll keep digging into this schematic to see what there is to see...
|