|
There's about 100mv on one pin 7, and 50 on the other.
The speakers are connected correctly- I made a diagram before I disconnected anything. (and I verified that they are indeed 8-ohm speakers)
Both C14 and C19 were originally replaced, and I doubt _both_ of them would be bad... but it's possible.
The only other voltages on the schematics is the 1.1 on the 6AU6s;
here I measure about 0.8 on one tube and 0.5 on the other. All of the HV seems to check out, so I'll try doing the tube roll. (any relation to the grid plate shuffle?... Sorry, couldn't resist.)
Also, PM to follow.
|