|
Just checked HOT cathode current, it's sitting at around 190ma. That's about 30ma high, but not really alarming to me. Anybody think the 6BK4 could be causing too much load on the HV supply? I'd like to adjust it, but I have no idea what the anode is currently at. Being that most of the pots in this chassis have drifter by quite a bit, it wouldn't suprise me at all if the anode voltage needs checking/correcting.
EDIT: forgot to mention that I replaced the old silicone on the flyback, and installed all new wiring for the HV rectifier filaments and HV reg.
Last edited by miniman82; 07-18-2010 at 12:55 PM.
|