Quote:
Originally Posted by holmesuser01
I have a 6.3v filament tranny rated at 14 amps. I tied it to the filament circuit.
Everything except the Hz output, and damper lit up. It was nice to see this.
Output and damper lit up when I disconnected one of the primary leads on this fried tranny and applied power to the set.
|
Odd!
My Sams schematic shows that the second power transformer (T-2) is
only used to supply heater voltage to the damper diode (6W4) heater, and that the Horizontal output tube (6BG6G) is connected to the "normal" non-isolated heater circuit (from T-1) as all of the other tubes, with one side of the heater circuit grounded. What does the Riders show?
jr