|
went out to hook up the scope and start trouble shooting the pic issue, power up, PERFECT pic.
the only thing I did was attach a lead to pin two of the video amp.
So I will clean up the garage, button up the back and get a pic.
Not sure why but I aint complaining.
the vert is a tiny bit jumpy, not as bad as my other zenith 20y chassis.
So now I will need to decide if I should pull the chassis or not.
the only issue I have is I know about those old paper caps HV hard shell tube caps. I am tempted to leave well enough alone as I know there is always a risk when disconnecting old plugs etc.. that something could break.
So I will button it up, get some pics, see if the picture contrast at the bottom of the tube returns and see if the vert jump settles down.
The picture color and focus is excellant. Needs a slight dynamic convergence adj. I may replace the diode pack on the board just because its old and I assume the Se's are getting leaky.
one of the reasons I want to pull the chassis is its just so damn dirty, WAF comes into play (if she happens to catch me with the back off, and its in the house).
|