|
WHOOOOO ok its working again. now just to be safe before i put this tv in fulltime use...
i am going to do more recapping.. sofar there has been 3 caps leaking blackish stuff from there bottoms.
also about that resistor i installed..
im pretty confident the origional resistor colors were either
brown-white-gold gold (1.9) or
Brown-grey-gold gold.. (1.8)
the difference is .1ohms..
how important is it that it is EXACTIALLY the same resistance??
what i put in there is a Brown-Grey-gold-gold (1.8ohm)
is it mostlikley the Vertical IC would run hotter than normal?
or maybe that the screen might not streach to be the full vertical size?
Last edited by aidynphoenix; 09-09-2010 at 05:34 PM.
|