|
Well I've replaced all the caps in the set except four small paper ones.
One of the paper caps I have left to do is a .005@1000 volts which I don't have in my stock, it's on the audio tube so it won't matter much as far as trying it out.
I was able to restuff all the electrolytics in the cans except for two that I had to mount underneath.
I couldn't find the box with the tubes for the set when I was leaving for work this morning, if I can find them tonight I'll probably give it a test run tomorrow and see what happens, I'm going to use the worst looking of the three CRT's in case something goes kerblooie.
|