I did enough recapping to get the Horiz Oscillator running, the biggest problem with that was an open Cathode resistor on the Horiz Output tube. It's supposed to be something like 80 ohms but it was measuring infinity, I jumped it with a 68 Ohm resistor and it started running.
The HV is still too low to make it to the CRT, probably because the filters are bad but I'm satisfied for tonight.
I've never seen a set that used 6W4's for the low voltage rectifiers but this one does, two of them.
I have a
Brochure <--(Download it) for the 1949 Westinghouse lineup, this model was their bottom of the line economy model.
My favorite line from the Brochure "It has adequate manual controls" nothing great, just "Adequate"
