Quote:
Originally Posted by Jeffhs
I took the pot completely out of the circuit; didn't replace it with anything. There was only one lead connected to the control when I removed it -- a white wire going to one pin of the 12AX7 preamplifier tube.
You mentioned substituting a fixed resistor for the 2meg volume pot. I haven't tried that yet. Would it work well enough to get some signal through to the preamp?
|
So where is the white wire connected now? ... Is there a capacitor from the plate of the previous stage? Is there any resistor to ground from the grid of the 12AX7? Something seems to be missing here!
jr