|
If so then I would say that thermistor is faulty and/or the degausing field. Now if there is a short in the daugausing field maybe it could cause the thermistor to blow? Without that thermistor operational you will have no degausing causing purity problems. Best way to tell if you have power to the degausing field is test for voltage at connection. should be 110v I believe. Had this happen to a Zenith of mine before. Also test the leads of the thermistoer for continuity. See if you get a reading (in ohms).
__________________
Honey, turn on the tv.. I'm cold!
|